fbpx
SEACHROME L-SHAPED 32" X 22.5" LEFT HAND SHOWER TRANSFER SEAT | SWING DOWN LEGS | NAUGAHYDE SSL2-320225 NW $529.10 $419.00
Save SEACHROME 'CORONADO 700 SERIES' RECTANGULAR TOILET PAPER HOLDER SATIN STAINLESS - 700-35 $50.00 $41.50

BENCH STYLE SHOWER SEAT BY SEACHROME | 22″ X 15″ | SSB-220150 TEAK

In Stock

$382.50 $268.48

Compare

BENCH STYLE SHOWER SEAT BY SEACHROME | 22″ X 15″ | NAUGAHYDE CUSHION | SSB-220150 NW. (Phenolic White – PW Shown Above)

Convenient, yoke-style bench seat that provides secure support in the shower, and easily folds against the wall when not in use.  Choose from a range of attractive material and finish options.

Shown Above – (Phenolic – White or Teak, 1/2” (13mm) thick x 3” (76mm) wide slats bolted to frame with countersunk stainless steel screws.)

Seachrome Bench Style 22″ x 15″ Shower Seat Naugahyde White – SSB-220150 NW Convenient bench seat provides solid support and easily folds up against wall when not in use. Optional Styles, Colors and Sizes Available at Additional Cost. Call for pricing. LENGTH: 22″ | DEPTH: 15″

 
STANDARD SEAT MATERIALS/COLORS
NW /NA – Naugahyde – White or Almond, covering 2” (51mm) thick foam mounted on 1/2” (13mm) thick marine plywood.

PW / PT – Phenolic – White or Teak, 1/2” (13mm) thick x 3” (76mm) wide slats bolted to frame with countersunk stainless steel screws.

PWS / PTS – Phenolic Solid – White or Teak, solid 1/2” thick single seat top with slots for drainage.

HW – HDPE (High Density Polyethylene) – White, 1/2” thick one piece.

SS- Solid Surface – Various Colors, 1/2” thick solid surface material.

Available frame finishes:  Satin Stainless, Polished Stainless, Powder Coat (9 standard colors: White, Biscuit, Almond, White Wrinkle, Almond Wrinkle, Satin Nickel, Bronze, Black, Polished Brass)

SPECIFICATIONS
Seachrome seats meet Federal Spec. WW-P-541/8B and ANSI 117.1. When properly installed, all seats exceed applicable federal load specifications. Meets and exceeds the minimum 250 lb. load requirement when properly installed.

Yoke:  #304 stainless steel (1″ diameter x 18 gauge, .048) with flanges (3″ diameter x 10 gauge, .135), welded to tubing (1″ round x 18 gauge, .048)

NOTE: Seachrome recommends that all accessibility seats, as well as grab bars, be installed using 2” minimum thickness “in-wall” solid wood backing material with #10 x 2” stainless steel, Phillips head, sheet metal screws, or using a wall-imbedded minimum 12 gauge (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws.

LOAD BEARING AND INSTALLATION:

When properly installed, all Seachrome shower seats have been designed and manufactured to support loads exceeding the downward pull requirements for Federal specifications FHA, VA, HUD, hospital codes, and private construction. The actual “in use” load bearing capacity of any shower seat, however, will be limited by the strength of its mounting surface and installation hardware. Seachrome recommends that shower seats be installed using 2″ minimum thickness “in wall” solid wood backing material with #10 x 2″ stainless steel, phillips-head, sheet metal screws, or using a wall embedded, minimum 12 ga. (2.8mm) steel anchor plate with #10 x 24 stainless steel machine screws. Please contact the factory for further mounting recommendations.
Under no circumstances should any shower seat be mounted to drywall, sheetrock, plaster, fiberglass, acrylic or other similar “hollow” wall surfaces without appropriate wood or steel backing material.

Specifications:  https://seachrome.com/file_downloads/SSB-220150-NW.pdf

Reviews

There are no reviews yet.

Be the first to review “BENCH STYLE SHOWER SEAT BY SEACHROME | 22″ X 15″ | SSB-220150 TEAK”

Your email address will not be published. Required fields are marked *

Back to Top
Social media & sharing icons powered by UltimatelySocial